Poster Sessions
Wednesday, November 6, 2024
Thursday, November 7, 2024
3:15 PM – 4:45 PM (Both Days)
Controls and Mechatronics
- Data-driven Sliding Mode Control with Application to Precision Motion System
Lei Cao, Sen Lu, Kaiming Yang, Tao Liu, Shaowei Zhan (Tsinghua University); Min Li (China University of Geosciences) - Development of Mobile Robot based 3D Position Measurement System
P. Choi, J. Kim, K. Kim (Korea Institute of Machinery & Materials) - Over-actuated Lightweight Precision Motion Stage Design Framework Based on Topology Optimization
Junnan Gao, Jingjie Wu, Lei Zhou (University of Wisconsin-Madison) - Development of Magnetic Levitation Coarse-Fine Stage with 6-Axis Laser Interferometers
Motohiro Takahashi, Takanori Kato (Hitachi, Ltd.)
Metrology Systems
- Enhancing Milling Process Efficiency Through Real-time Tool Condition Monitoring Using Advanced Sensor Systems
Katarzyna Antosz, Jarosław Sęp, Sławomir Prucnal (Rzeszow University of Technology); Edward Kozłowski (Lublin University of Technology) - Re-Design of The Collimated Phase Measuring Deflectometry System
Corey D. Austin, Lei Huang, Tianyi Wang, Mourad Idir (Brookhaven National Laboratory) - Development of the Second Harmonic Noise Decomposition Method for Enhanced the Quality of Fringe Pattern Denoising using Deep Learning
Juncheol Bae, Hwan Kim, Jurim Jeon and Yangjin Kim (Pusan National University) - Freeform Lens Thickness Measurement using a Chromatic Confocal Probe
Kaushal Narayan Budanur, Jacob P Guymon, Tyler Young, Gracious Ngaile (North Carolina State University) - 5D Sample Metrology: Design, Installation, Commissioning and verification at Mogno Beamline Nano station in LNLS/Sirius
Cassiano S. N. C. Bueno, Gabriel S. R. Costa, Gabriel B. Z. L. Moreno, João F., G. A. Oliveira, Larissa M. Moreno, Mailson S. Souza, Mailson Silva, Maria J. B. França, Paola C. Ferraz, Nathaly L. Archilha (Brazilian Center for Research in Energy and Materials) - Range Revolved Interferometry for Use in High Precision Positioning Systems
Axel Grabowski, Sven Mittag, Carolin Walenda (Physik Instrumente GmbH & Co. KG) - Deep Learning-Based Wavefront Reconstruction: Optical Interferometric Technique for Surface Topography of Silicon Wafer
Hwan Kim, Juncheol Bae, Jurim Jeon, Yangjin Kim (Pusan National University) - Dynamic Behavior of a Kinematic Style, Gravity-closed, XYθ-Compliant Baseplate Mount
Jimmie Miller, Sania Khan, Taner Tunc (University of North Carolina – Charlotte) - Pixelated Pattern Illumination for Chromatic Focus Variation Microscopy: Enabling Specular Surface Measurement
Hussam Muhamedsalih, Aalim M. Mustafa, Dawei Tang, Prashant Kumar, Jan Jiang (University of Huddersfield) - Performance Evaluation for Hall Effect Sensors Based on Configuration
Tobechukwu D. Nwabueze, Ross Zameroski, Tony L. Schmitz (University of Tennessee, Knoxville) - Fiducial Patterning for Large-part Manufacturing via Three-ball Artifact Master (T-BAM)
Hadarel Rappaport, Jimmie Miller (University of North Carolina – Charlotte) - A Method for Measuring Recoating Plane Errors in LPBF-AM Machines with an Inertial Measurement Unit
Jesse Redford, Greg Vogl (National Institute of Standards and Technology) - Development of the External Force Estimation Model for Parallel Link Mechanism Robot
Akari Tawa, Takumi Nozaki, Taiki Anan, Yuta Shinomiya, Yoshitaka Morimoto, Akio Hayashi, Hidetaka Yamaoka, Nobuaki Fujiki (Kanazawa Institute of Technology) - Generating and Resolving Soft and Hard Singularities at Electrical Triple Junctions for DC Vacuum Surface Flashover Engineering
Johannes M. Vogels (VDL ETG Technology and Development)
Micro-Nano Technologies
- Molecular Dynamics Research on Nano-scratching Behavior of Hydrogenated Amorphous Carbon Films
Shusen Guo (Guangdong Polytechnic Normal University); Zhaoxi Zhao (Guangdong University of Technology) - High-resolution Full-color Quantum Dots Patterning for Display Applications Based on Femtosecond Laser Induced Forward Transfer
Shu-Yu Liang, Shi-Qi Chen (University of Hong Kong); Yue-Feng Liu (Jilin University) - Spatiotemporal Modulation of Light in Microscale Selective Laser Sintering for Enhanced Process Resolution
Aaron Liao, Joshua Grose, Michael Cullinan (The University of Texas Austin); Heejin Kim. Chinedum Okwudire (University of Michigan) - Design and Fabrication of a Mexo-sized, Thermal Linear Transducer for Active Metamaterials
Tyler R. Woodard, Tony L. Schmitz (University of Tennessee, Knoxville)
Other
- Repeatability of Robotic WAAM Geometric and Mechanical Properties for Aluminum Printing
Kamren M. Sargent, Hutchison R. Peter, Joshua J. Penney, Tony L. Schmitz (University of Tennessee, Knoxville) - Direct Motor Cooling Using Liquid Immersion Cooling Technique
Genki Uchiyama, Yusei Hashimoto, Yohichi Nakao (Kanagawa University) - Additive Friction Stir Deposition Dynamometer Design and Evaluation
Tyler R. Woodard, Robert Patterson, Tony L. Schmitz (University of Tennessee, Knoxville) - Design and Fabrication of Desktop CNC Milling Machine
Tyler R. Woodard, Tony L. Schmitz (University of Tennessee, Knoxville)
Precision Design
- Coupled Elasto-hydraulic Model for Large Hydrostatic Rotary Tables
Markel Alana, Julen Bastardo, , Natalia Colinas, Harkaitz Urreta, Gorka Aguirre (IDEKO); Jaione lriondo (Mondragon Unibertsitatea) - Design of Z/Tilt Parallel Mechanism Based on a Flexible Joint and Piezo Stepping Actuator
Kyung-Rok Kim, Dongwoo Kang, Hyunchang Kim, Jaeyoung Kim (Korea Institute of Machinery and Materials) - Evaluation of Link Length Errors for a 6-axis Serial Robot Based on Kinematics
Sung Hwan KWEON, Young Hun JEONG, Seung Han YANG (Kyungpook National University) - Estimation of Loop Stiffness for Multi-axis Machine Tool
Sungcheul Lee, Changkyu Song, Gyungho Khim, Seung-Kook Ro (Korea Institute of Machinery and Materials) - Design and Additive Manufacturing of Functionally-graded Lattice Structures for Improving Buckling and Post-buckling Responses
Aamer Nazir (King Fahad Universit of Petroleum & Minerals) - A Torsion Balance for Testing the Nature of Gravity
Jon R. Pratt, Stephan Schlamminger (National Institute of Standards and Technology); Lorenz Keck, Jacob Taylor (University of Maryland) - Design and Evaluation of Fixture for Random Vibration Testing of Fire Extinguisher for its Airworthiness
Deepak Singh D, Tapas Debnath, Shashanth Nag (C-ASMP, Central Manufacturing Technology Institute) - Development of a Machine Tool Energy Consumption Evaluation System Based on ISO 14955
Deepak Singh D, Tapas Debnath, Shashanth Nag (C-ASMP, Central Manufacturing Technology Institute) - Development of Large Deflection Single DOF Compliant Rotary Joint
Subrat, Jitendra P. Khatait (Indian Institute of Technology) - Open Source Air-Bearing Simulation
Janis H. Wortmann, Manuel Scholz (Eitzenberger GmbH)
Precision Manufacturing
- Upcycling Machining Chips for a Circular Economy in Additive Friction Stir Deposition
Sweta Baruah, Tony Spezia, Jose Nazario, Rob Patterson, Tony Schmitz (University of Tennessee, Knoxville) - Precision Glass Molding of Aspherical Lenses Using Multi-cavity Tooling
Dhanooj Bobba, Christopher Morgan (Moore Nanotechnology Systems) - The Impact of Temperature Fluctuations on Air Bearing Performance: Addressing the Challenges
Ayberk Erturk, Jeff Sward (OAV Air Bearings) - Observation of Metal Powder Behavior in Additive Manufacturing Method by Selective Solidification Using Electrical Discharge
Katsushi Furutani, Kokei Hirako, and Hiroki Yamagishi (Toyota Technological Institute) - Integrating Project and Group Based Learning to Develop Hands-On Precision Manufacturing Skills in Post-Graduate Students
Zareena Gani (University College London) - Surface Finish Prediction of Modulated Tool Path of Tapered Workpieces
Ryan A. Garcia, Tony Schmitz (University of Tennessee, Knoxville) - Deep Learning for the Measurement and Compensation of Laser Micro Hole Drilling
Meongjun Kim (Chungnam National University); Pilgong Choi, Kyunghan Kim (Korea Institute of Machinery & Materials) - Analytical Approach for Precise Localization and Quantitative Assessment of Surface Defects in Additive Manufacturing
Xiangjun Kong, Tibebe Yalew , Qingkang Bao, Mingda Harvey Yang, Gerardo Adesso, Samanta Piano (University of Nottingham) - Increasing Resolution of Additive Friction Stir Deposition using a Flexure-based Implementation
Malachi Landis, Marko Beric, Ping Guo (Northwestern University) - Look-ahead Based Feedrate Planning For CNC Interpolator
Chan-Young Lee, Chang Kyu Song, Seung Kook Ro, Chan-Ju Kim (Korea Institute of Machinery and Materials) - Challenges With Metal Big Area Additive Manufacturing for Machine Tool Cross Beam Manufacturing
Tyler Poon, Justin L. West1 Emma D. Betters, Tony Schmitz (University of Tennessee, Knoxville); Scott Smith, Christopher T. Tyler (Oak Ridge National Laboratory) - Extended Study on the Composition of Magnetorheological Fluids for the Post-processing of Micro-milling Tools
Fabian Sordon, Jürgen Maas, Christian Lahoda, Mitchel Polte, Eckart Uhlmann (Technische Universität Berlin) - Evaluation of Surface Properties of Ultraprecision Diamond-cut Copper-plated Surfaces
Hideo Takino (Chiba Institute of Technology); Hidenori Aizawa (Sendai Nikon Corporation); Masahiko Kanaoka (JTEC Corporation) - High Precision Positioning Using Electrical Contact Verification
David Taub (ASML) - Fundamental Investigation of Manufacturing and Application of Ball Nose End Mills Made of Binderless Carbide for Machining AlMgSi1
Eckart Uhlmann, Mitchel Polte, Christian Lahoda, Niklas Maschke ((Technische Universität Berlin) - Investigation on Reduction of Tool Wear in Electrical Discharge Finishing Processes with Graphite Tool Electrodes
Eckart Uhlmann, Mitchel Polte, Sergio Lezama, Kai Thißen (Technische Universität Berlin - Precision Manufacture of Microstructured Polymer Surfaces: a Roll-to-plate Embossing Method
Zhanchen ZHU, Chi Fai Cheung (The Hong Kong Polytechnic University)
Surface Characterization and Applications of Measurement Science
- Stochastic Modelling of Surface Topography Data Using Autocorrelation Information
Mohammed A. Isa, Helia Hooshmand, Samanta Piano, Richard Leach (University of Nottingham) - Measurement and Evaluation of Machine Tool Errors Under Simulated Tool Loads
Tyler C. Young (North Carolina State University) - EUV Light Source Integration Into the Berkeley Microfield Exposure Tool
Dmytro Zaytsev, Arnaud Allézy, Ryan Miyakawa, Senajith Rekawa (Lawrence Berkeley National Laboratory)