Poster Sessions
Boston Park Plaza
Georgian Ballroom and Georgian Ballroom Foyer
Poster Session 1
Wednesday, November 15, 2023
3:15 PM – 5:00 PM
Precision Design
- On Kinematic Coupling Mechanisms For Automated Build Plate Removal In Vat Photopolymerization
Marina Artemeva, Gwendoline A. E. Anand, Alberto Basso, Anna Danielak, Javier L. Navas, Venkata K. Nadimpalli, David B. Pedersen (Technical University of Denmark) - Design and Characterization of an XYθz Nanopositioner
Bingxiao Ding, Chenglin Li, Shih-Chi Chen (The Chinese University of Hong Kong) - Aerostatic Motor Spindle with Integrated Ultrasonic Resonator System and Closed Loop Resonance Frequency Control
Marius Heintz, Jan Engmann, Ralf Dupont (Levicron GmbH) - Nonlinear Hybrid Modeling Method Considering Geometry-driven End-effect of Iron-cored Linear Permanent-magnet Synchronous Motor
Sang Won Jung, Hyo Geon Lee, Jae Hyun Kim, Sang Min Lee, Jung Min Park, Bo Min Kang, Jong Min Sung, Jun Young Yoon (Yonsei University) - Updates on the New Kibble Balance at NIST
Lorenz Keck, Frank Seifert, Darine Haddad (National Institute of Standards and Technology); René Theska (Ilmenau University of Technology) - Static and Dynamic Stiffness of an Ultra-Precision Biconic Air Bearing
Byron Knapp, Dan Oss, Dave Arneson (Professional Instruments Company) - Program for Design of Accurate Kinematic Couplings
Alexander Slocum (Massachusetts Institute of Technology), Michel Pharand (KLA), Tyler Seawright (San Jose State University) - Thermal Analysis of High-speed Aerostatic Spindle with Different Cooling Structures Based on Experimental Study
Shumon Wakiya, Jumpei Kusuyama, Yohichi Nakao (Kanagawa University); Dmytro Fedorynenko (Tohoku University) - Time Critical Design of a High Precision Positioning Module for Dynamic Performance
Joe Wihbey, Justin Burchfiel, Alper Dumanli, Matthew Sorna (ASML) - Thermal Displacement Prediction of Simple Mechanical Machine Tool Spindle Model Using Machine-learning Method
Fuusei Yagi, Jumpei Kusuyama, Yohichi Nakao (Kanagawa University) - Electrical and Mechanical Coupling of Large Batteries
Leonardo O. Zamora Yanez, Eduardo Barrios, Alexander Slocum (Massachusetts Institute of Technology)
Precision Manufacturing
- Additive Manufacturing in Polymer Extrusion Tooling: Experimental Testing and Surface Characterization
Arhimny H. Aimon , Matteo Todaro, Guido Tosello, David B. Pedersen , Matteo Calaon (Technical University of Denmark (DTU)) - Precision ID Grinding of a Large Part Using a Novel Step-Compensated Conical Hydrostatic Work Spindle
Dave Arneson, Byron Knapp (Professional Instruments Company) - Process Optimization of Precision Glass Molding Process
Dhanooj Bobba, Harish Cherukuri (University of North Carolina – Charlotte); Christopher Morgan (Moore Nanotechnology Systems) - Development of the Damping Carriage Applied Gyroid Structure
Tetsuya Fukuda, Keigo Takasugi, Naoki Asakawa (Kanazawa University) - Method to Assess Particle Cleanliness of High Precision Operations
Eric A. Gold, Miranda van den Berg, Jack van Dalen, Frank van den Eshof, Gerrit Oosterhuis (VDL ETG Technology and Development) - Sensorless Compensation of Thermal Errors in Precision Electric Spindle
Jihui Han, Liping Wang, Dong Wang, Xuekun Li, Yun Zhang (State Key Laboratory of Tribology and Institute of Manufacturing Engineering); Qijun Yu (Guang Yu Da Cheng CNC Machine Tool Co, Ltd.) - Atomic-scale Investigation of Chemical Mechanical Polishing Process by Nano-sized Ceria by Molecular Dynamics Simulation with Neural Network Potential
Teruo Hirakawa, Fukiko Ota, Nanami Antoku, Daisuke Ikura, Akihiro Orita, Yoshishige Okuno, Satoyuki Nomura (Resonac Corporation) - Study on Micro-texture Grooving of Acrylic Glass for Submerged Solar Panels
Ashin Hirao, Akinori Yui (Kanagawa University); Hirofumi Suzuki (Chubu University) - Digital Light Processing (DLP) Based Fabrication of Porous Ceramics by Optimizing Materials and Process Parameters
Insup Kim, Alberto Andreu, Yong-Jin Yoon (KAIST) - Analysis of the Influence of 3D Printing Process Parameters on the Variability of Surface Irregularities for Casting Models
Tomasz Kozior, Paweł Zmarzły, Damian Gogolewski (Kielce University of Technology) - Ergodic Control of a Differential Drive Robot for Large-Scale Surface Texturing
Malachi Landis, Annalisa Taylor, Yaoke Wang, Todd Murphey, Ping Guo (Northwestern University) - A Study of Structured Surface Generation on Tungsten Carbide by Electrical Discharge Machining with Self-assemble Ball Electrodes
Kangsen Li, Chi Fai Cheung, Chunjin Wang (The Hong Kong Polytechnic University); Feng Gong (Shenzhen University) - Multilayer Structures with Microscale Selective Laser Sintering Enabled by a Blade Coating Approach
Aaron Liao, Michael A. Cullinan (The University of Texas Austin) - A Study of Sub-region Machining with Variable Cutting Depth Strategy for Reducing the Cutting-force Fluctuation in Ultra-precision Diamond Turning of High Steepness Microstructures
Xiao Lu, Chi Fai Cheung, Chunjin Wang, Lai Ting Ho (The Hong Kong Polytechnic University) - Plasma Polishing of Gallium Nitride Substrate Using Atmospheric-Pressure Plasma with Hydrogen Gas
Genta Nakaue, Motoki Nabata, Jumpei Yamada, Daisetsu Toh, Kazuto Yamauchi1, Yasuhisa Sano (Osaka University) - Distortion-free Processing Method Using Plasma Chemical Vaporization Machining with a Wire Electrode for Narrow-gap Channel-cut Crystal Monochromators
Iori Ogasahara, Shotaro Matsumura, Kazuto Yamauchi, Yasuhisa Sano (Osaka University); Taito Osaka, Makina Yabashi (RIKEN Spring-8 Center) - The Dig-in Instability in Iterative Orthogonal Cutting
Aaron E. Ramirez, Martin L. Culpepper (Massachusetts Institute of Technology) - Effect of Tool Sharpness in Cutting of Rubber-like Solids
Ryutaro Sambe, Urara Satake, Toshiyuki Enomoto (Osaka University) - Analysis of Machinability Influence in CFRP Hole Machining Due to Residual Heat from Previous Holes
Kangwoo Shin, Seok-Woo Lee, Jeongsoo Nam, Seong Hyun Kim, Kyeongeun Song, Tae-Gon Kim (Korea Institute of Industrial Technology) - Abrasive Properties of Magnetorheological Fluids for Immersed Tumbling Processes
Fabian Sordon, Jonas Ludwig, Toni Hocke, Eckart Uhlmann, Jürgen Maas (Technische Universität Berlin) - Increasing the Relative Density of Additively Manufactured Tungsten Carbide-Cobalt Tool Electrodes for EDM
Eckart Uhlmann, Mitchel Polte, Robert Hörl, Robert Reimann, Thomas Braun, Toni Hocke (Technische Universität Berlin) - Evaluation Method for Volume of Machining Area for Non-orthogonal Five-axis Machine Tools
Naoki Wakai, Keigo Takasugi, Naoki Asakawa (Kanazawa University) - A Systematic Way of Vibration Reduction for A Semiconductor Inspection Equipment
SeungHa Yu, YongHo Jeon, Young-Man Choi, Moon Gu Lee (Ajou University) - Roundness Deviation of Casting Patterns Produced by Selected Additive Technologies
Paweł Zmarzły, Damian Gogolewski, Tomasz Kozior (Kielce University of Technology)
Micro-Nano Technologies
- High-throughput Maskless Optical Lithography System Based on Digital Holography
Zhiyu Deng, Songyun Gu, Zixu Feng, Shih-Chi Chen (The Chinese University of Hong Kong) - Manufacturing of Smooth Surfaces using Photopolymer Resins
James A. Garcia, Michael A. Cullinan (The University of Texas at Austin) - Developing In-line Metrology of 3D Holographic Patterns During Roll-to-Roll Manufacturing Processes
Barbara Groh, Kwon Sang Lee, Sofia Frey, Alessandra Grady, Michael A. Cullinan, Chih-Hao Chang (The University of Texas at Austin); Liam G. Connolly (National Institute of Standards and Technology) - Model Based Optimization of Digital Laser Masks for Part Shape Improvement in a Microscale Selective Laser Sintering System
Joshua Grose, Aaron Liao, Michael A. Cullinan (The University of Texas at Austin); Heejin Kim, Chinedum Okwudire (University of Michigan)
Other Precision Engineering Areas
- Freeform Surface Measurement Using and Optical Pickup Unit
Luis Arturo Aguirre (The University of Texas at Austin); Kumar Arumugam (National Institute of Standards and Technology); Jesse Redford, Stuart Smith (University of North Carolina – Charlotte); Todd Noste (Lawrence Livermore National Laboratory) - Multiscale Analysis of Surface Topography in Foundry Aspects
Damian Gogolewski, Tomasz Kozior, Paweł Zmarzły (Kielce University of Technology) - Advanced Piezoelectric Actuator Modelling for Accurate Charge and Voltage Prediction and Control
Haoyuan Li, Jeroen van Duivenbode, Elena A. Lomonova (Eindhoven University of Technology)
Poster Session 2
Thursday, November 16, 2023
3:15 PM – 5:00 PM
Controls
- Dynamic Modeling of Electrostatic Levitation for Reticle Handoff in Photolithography Tools
Brij M. Bhushan (ASML); David L. Trumper (Massachusetts Institute of Technology) - Small-size Vernier Permanent Magnet Motors for High-torque Direct-drive Actuation
Jixuan Feng (The University of Texas at Austin); Laura Homiller, Lei Zhou (University of Wisconsin-Madison) - Equivalent Circuit Model of Hysteresis for Stacked Piezoelectric Actuators
Katsushi Furutani (Toyota Technological Institute) - Permanent Magnetic Dipole Spherical Actuator Back-Iron for Improved Power Efficiency & Shielding
Tyler T. Hamer, Joshua Chabot (MIT Lincoln Laboratory); David L. Trumper (Massachusetts Institute of Technology) - Self-Sensing Magnetic Bearing
Laura Homiller, Lei Zhou (University of Wisconsin-Madison); Jason Ikonomopoulos, (The University of Texas at Austin) - Temperature Control of Built-in Motor Spindle and Resultant Thermal Displacement
Ryota Ishida, Shumon Wakiya, Jumpei Kusuyama, Yohichi Nakao (Kanagawa University) - Inertial Disturbance Compensation Method of 2-DOF Magnetic Levitator for High-throughput Non-contact Transportation
Jae Woo Jung, Eun Kyu Kim, Hyeong Min Yoon, Jun Young Yoon (Yonsei University) - Energy Consumption Simulation for Tool Path Using Model of Feed Drive System
Naru Kawamura, Akio Hayashi, Yoshitaka Morimoto (Kanazawa Institute of Technology) - Inertial Force Compensation Method of 2-DOF Magnetic Levitator for Energy-efficient Non-contact Transportation
Eun Kyu Kim, Jae Woo Jung, Hyeong Min Yoon, Jun Young Yoon (Yonsei University) - LIGO Double Pendulum Prototype for Reducing Mechanical Mode Cross-Couplings
Regina E. Lee, Vermeer Bonhomme, Richard K. Mittleman, Kevin Kuns, Lisa Barsotti, David L. Trumper (Massachusetts Institute of Technology); Brian T. Lantz (Stanford University) - Parallel Pressure Control for the Balancing Cylinders of the Ultraprecision Electric-pneumatic Vertical Positioning Stage
Ryo Mineguchi, Genki Harada, Tomonori Kato (Fukuoka Institute of Technology) - Dynamic Control of a Payload with a Piezoelectric Stack Actuator
Charles B. Seaberg, David L. Trumper (Massachusetts Institute of Technology) - Active Center Position Control of Machine Tool Spindle
Kai Segawa, Akio Hayashi, Yoshitaka Morimoto (Kanazawa Institute of Technology) Masayuki Obata (Komatsu NTC Ltd.) - Moving Magnet Planar Maglev Stage with XY Symmetry Layout
Motohiro Takahashi (Hitachi, Ltd.) - Improvement of Drive Frequency of Inchworm Actuator Using Sinusoidal Signal
Hayata Takashima, Akihiro Torii, Suguru Mototani, Kae Doki (Aichi Institute of Technology) - Error Compensation of Parallel Mechanism Machine Tools Using the Mirror Method
Akari Tawa, Takumi Nozak, Yoshitaka Morimoto, Akio Hayashi, Hidetaka Yamaoka Nobuaki Fuziki (Kanazawa Institute of Technology)
Metrology Systems
- Stiffness Measurement of a Miniature Glass Flexure using the Electrostatic Force Produced by Sphere-coaxial Wire Electrodes
Kumar Arumugam, Jonathan Cripe, Sven Schulze, Stephan Schlamminger, Gordon Shaw (National Institute of Standards & Technology) - Characterization of Angle of Incidence Errors in Confocal Probe
Kaushal Narayan Budanur, Jacob P. Guymon, Tyler Young, Mark Pankow (North Carolina State University) - Mounting Tolerance Analysis of Encoders on a Non-uniformly Arranged Self-calibration Method for Improving the Measurement Accuracy of Angular Motion
Jinsoo Choi, Hongki Yoo (Korea Advanced Institute of Science and Technology); Dongwoo Kang (Korea Institute of Machinery and Materials) - Phase Unwrapping Method for Optical Metrology Based on Deep Learning
Jurim Jeon, Yangjin Kim (Pusan National University) - High Accuracy Hole Measurement for “Medium Size Assemblies” – An Evaluation of an Optical 3D Coordinate Measuring System
Rehab M. Khattab, Edward P. Morse (University of North Carolina – Charlotte) - Beam Steering Interferometry for Enlarged Angle Acceptance: Analysis of Measurement Uncertainty
K. Looman, L.C. Cacace, J.P.M.B. Vermeulen (Eindhoven University of Technology); R. Hendrix (Prodrive Technologies) - Lensless Tip and Tilt Measurement Using Speckle Imaging
Sevda Mamaghani, Jimmie Miller, Konstantinos Falaggis (University of North Carolina – Charlotte) - Thermal Chamber Design and Optical Alignment for Testing Thermal Mitigation Using Bowtie Mounting Configuration
Jimmie Miller, Geoffrey Heacock (University of North Carolina – Charlotte) - Accessible High Pressure Lubricant Traction Coefficient Test Device
Trevor R. Murphy, Alex H. Slocum (Massachusetts Institute of Technology) - A Metrology System for 3D Printed Objects
T. Okamoto, S. Ura, A. K. Ghosh (Kitami Institute of Technology); S. Yonehara (Rengo Co., Ltd.) - Complementary Aspects of Optical Alignment and Image Symmetry
Robert E. Parks (Optical Perspectives Group, LLC) - Measuring the Frequency of a Pendulum
Jon R. Pratt, Stephan Schlamminger (National Institute of Standards and Technology); Charles A. Condos, Jack Manley, Dalziel Wilson (University of Arizona) - Interferometric Metrology Probe for Highly Sloped Optics
Hayden J. Wisniewski, Robert A. Smythe, Artur G. Olszak (Äpre Instruments Inc.) - Magnetic Mapping of Quadrupole Magnets using an Integrated CMM and Hall Sensor System
Dave Yeagly, Erik Wallen, Miguel Munoz (Lawrence Berkeley National Laboratory)
Surface Characterization
- Process Quality Classification of Machine Learning-based Automotive Parts Joining Systems
Beomjin Kim, Jeahong Sim, Kihyun Kim, Hyo-Young Kim (Tech University of Korea) - Effects of Laser Ablation Parameters and Surface Texture on Strength of Lap Adhesive Joints
Ryszard Perlowski, Pawel Pawlus (Rzeszow University of Technology); Rafal Reizer (University of Rzeszow) - Surface Planarization of YAG Ceramics Using Catalyst-Referred Etching
Yusuke Yoshida, Kiyoto Kayao, Daisetsu Toh, Kazuto Yamauchi, Yasuhisa Sano (Osaka University) - Lens Surface Correction Path Optimization Using Machine Learning
Tyler C. Young, Jacob P. Guymon, Mark Pankow (North Carolina State University)