Poster Session
Tuesday, November 15, 2011, 3:30 PM – 5:00 PM
Wednesday, November 16, 2011, 3:30 PM – 5:00 PM
Control of Precision Machines
- Spatial Micro Manipulation With Thin Wires and Piezo Elements
Aoyama, H.; Shinoda, A.; Hirata, S. (University of Electro-Communications) - Metrology Assisted Manufacturing
Elepano, A. (Nikon Metrology, Inc.); and Lightowler (Nikon Metrology UK) - Development of a Magnetic Bearing Stage With Reaction Force Cancellation
Kim, B.-S.; Ro, S.-K.; Lee, S.; Park, J.-K. (Korea Institute of Machinery & Materials (KIMM)) - Characterization of Periodic Disturbances in Rolling Element Bearings Using an Optical Sensor
Kirsch, N. A.; Cole, D.G.; Vipperman, J. S. (University of Pittsburgh); and Ludwick, S. J. (Aerotech, Inc.) - Vibration Suppression for Impulsive Motion in Direct Drive Linear Stage
Lin, W.; Lin, W. J.; Yang, G. (Singapore Institute of Manufacturing Technology); and Yuan, H.; Zhong, Z. (Nanyang Technological University) - Conditions And Limitations of the Low-bandwidth Visual-servo Loop in Micro-positioning Applications
Montes-Solano, C.A.; Wong, C.; Mears, L. (Clemson University); and Ziegert, J. C;( University of North Carolina at Charlotte) - Hydraulic Actuator for Power Joint Mechanism
Park, K.-T.; Kim, H. M.; Kim, D. H.; Kim, S. J.; Lee, C. D. (Korea Institute of Machinery & Materials (KIMM)) - Modeling and Design of a Microscale Multiplexed Temperature Control System
Phaneuf, C. R.; Pak, N.; Saunders, D. C.; Forest, C. R. (Georgia Institute of Technology) - Position Sensoring Module by Combining Photogrammetry and Projection Pattern
Zheng, B.; Mullany, B. A.; Morse, E. P. ; Davies, A. D. (University of North Carolina at Charlotte)
Design of Precision Machines and Instruments
- Retrofitting a Haas Gt-20 Lathe with an Oil Hydrostatic Spindle
Arneson, D. A. (Professional Instruments Company, Inc.) - Effect of Joint Stiffness on the Dynamic Performance of Machine Tool
Fong, F.; Benjamin, R. J. (Benstone Instruments) - Hybrid Systems for High Accurate Trajectory Tracking with Sub Nanometer Resolution
Glöss, R. (Physik Instrumente (PI) GmbH & Co.KG) - The Measurement of Meso-Scale Torsion Springs
Jared, B.H.; Saiz, D.; Perry, J. (Sandia National Laboratories) - A Precision Thermal Press for Polymer Processing
Kiew, C. M.; Tan, J. L.; Teo, T. J.; Lin, W.; Yang, G. (Singapore Institute of Manufacturing Technology); and Lam, Y. C. (Nanyang Technological University) - Design and Control of a Planar 3-DOF Parallel Micro-manipulator
Lee, C.-W.; Lee, J.-J.; Lee, J.-H.; Lee, M.-G. (Ajou University) and Park, J. K. (Korea Institute of Machinery & Materials (KIMM))
Interferometry and Optics
- Form Measurements of Specular Parts by Combining Beam Propagation, Optical Scattering, and Photogrammetry
Bowes, K. E. Dong, Y.; Mullany, B. A.; Morse, E. P.; Davies, A. D. (University of North Carolina at Charlotte) - Using an Optical Software Package to Analyze Photogrammetry System Errors
Dong, Y.; Hutchens, T.; Mullany, B. A.; Morse, E. P.; Davies, A. D. (University of North Carolina at Charlotte) - High Powered Frequency Stabilized HeNe Gas Laser with 3.5 mW From a Single Mode
Ellis, J. D. (University of Rochester); Voigt, D. (VSL Dutch Metrology Institute); Spronck, J. W.; Munnig Schmidt, R.-H. (Delft University of Technology); and Verlaan, A. (TNO Science and Industry) - Aspheric Wavefront Measurement by Reference-Free Wavefront Sensor (RFWS)
Guo, W.; Chen, I-M. (Nanyang Technological University) and Zhao, L. (Singapore Institute of Manufacturing Technology) - Shack-Hartmann Wavefront Sensor With Digital Scanning
Guo, W.; Zhao, L. (Singapore Institute of Manufacturing Technology); and Chen, I-M. (Nanyang Technological University) - Two-step Fourier Transform Method for Interferogram Analysis
Kamiya, K.; Nomura, T.; Matsumoto, K. (Toyama Prefectural University); and Tashiro, H. (Toyama University) - The Influence of Curing Time on Hydroxide Catalysis Bonding Strength
Kim, H. S.; Reinhardt, K.; Schmitz, T.L. (University of Florida) - Optical Alignment of SAMM to Reduce Cosine Error
Miller, J. A.; Caskey, G. W.; Hocken, R. J. (University of North Carolina at Charlotte)
Multi-Axis Machine Design
- Freedom and Constraint Analysis and Optimization
Brouwer, D. M.; Boer, S. E.; Aarts, R. G. K. M.; Meijaard, J. P.; Jonker, J. B. (University of Twente) - Design & Fabrication of a Precision Pulsed Valve System for Neutron Imaging
Fitsos, P.; Edson, S. L.; Hall, J.; Rusnak, B. (Lawrence Livermore National Laboratory) - A Study on a Novel 3-DOF Spherical Motor with the VCM Principle
Kim, H.; Kim, H.-Y. Woo, S.; Lee, H.; Gweon, D.-G. (Korea Advanced Institute of Science & Technology (KAIST)) - Characterization of Translation of Fused Silica Micropipettes in Non-rectilinear Trajectories
Kodandaramaiah, S. B.; Go, J.; Malik, S. Sondej, N.; Forest, Craig R. (Georgia Institute of Technology); Krijnen, M.; Khatait, J. P.; Aarts, R. G. K. M.; Brouwer, D. M.; (University of Twente); and Boyden, E. S. (Masachusetts Institute of Technology) - Design of Artificial Hip Joint Simulator for Wear Test
Lee, H. H.; Yang, M. Y. (KAIST); and Lee, S.; Lee, S. E.; Park, J.-K. (Korea Institute of Machinery & Materials (KIMM)) - Development of a Novel Compact 3-DOF Out-of-plane Stage
Lee, H.J.; Kim, H.C.; Kim, H.Y.; Gweon, D.-G. (Korea Advanced Institute of Science & Technology (KAIST)) - Development of a Novel Compact 3-DOF Out-of-plane Stage
Lee, H.J.; Kim, H.C.; Kim, H.Y.; Gweon, D.-G. (Korea Advanced Institute of Science & Technology (KAIST)) - Manually Operated Precision Assembly Machine for Building High Power Laser Targets
Montesanti, R. C.; Edson, S. L.; Lawson, B. L.; Buice, E. S.; Wallace, R. J.; Biesiada, T. A.; Horner, J. B. (Lawrence Livermore National Laboratory); Ruppe, J. A.; Goade, S. J. (General Atomics); Heidl, B. F. and Vonhof, S. A. (Akimia Infrastructure Services, Inc.) - New Prototypes of Micromachine Tools
Ruiz-Huerta, L.; Caballero-Ruiz, A.; Herrera-Granados, G.; Yañez-Valdéz, R. (Universidad Nacional Autónoma de México) - A Novel Ultrahigh-resolution Monochromator/Analyzer System for an Inelastic X-ray Scattering Spectrometer with 26 Precision Positioning Stages
Shu, D.; Stoupin, S.; Khachatryan, R. M.; Goetze, K. A.; Roberts, T.; Shvyd’ko, Y. (Argonne National Laboratory) - Modeling and Measurement of H-Bot Kinematic Systems
Weikert, S. (inspire AG at ETH Zurich); Ratnaweera, R. (FlexFactory); Zirn, O. (Clausthal University of Technology); and Wegener, K. (Institute of Machine Tools and Manufacturing at ETH Zurich)
Nano-Positioning
- Design, Fabrication, and Testing of a Moving Magnet Actuator for Large Range Nanopositioning
Hiemstra, D. B.; Parmar, G.; Chen, Y.; Awtar, S. (University of Michigan – Ann Arbor) - Kinematic Analysis and Control of 3-DOF Parallel Manipulator
Kim, T.; Lee, M.-G.; Lee, J.-J. Jeon, Y. (Ajou University); and Kim, H.-S. (Institute for Advanced Engineering (IAE)) - Analysis of the Cosine Error in Measurements Using the Nanopositioning and Nanomeasuring Machine
Kreutzer, P.; Füßl, R; Manske, E. (Ilmenau University of Technology) - Progress In Development of an Si-traceable Precision Nanoindentation Platform
Nowakowski, B. K.; Smith, D. T. (National Institute of Standards and Technology); and Smith, S. T. (University of North Carolina at Charlotte)
Precision Component Design
- Design and Development of Small-sized Stepper Motors
Caballero-Ruiz, A.; Ruiz-Huerta, L.; Armida, R.; Tejeda, E.; Munive, E. (Universidad Nacional Autónoma de México) - Experimental Determination of Nut Stiffness in Ballscrews
Chung, S.-C. (Hanyang University); and Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)) - Thermal Model of Machine Tool Feed Drivetrains
Ess, M.; Mayr, J.; Wegener, K. (Swiss Federal Institute of Technology – ETH Zurich); and Weikert, S. (inspire AG at ETH Zurich); - Load Bearing Capacity and Stiffness of Porous Journal Gas Bearing Elements in a Vacuum Environment
Heidler, N.; Tünnermann, A. (Friedrich-Schiller University Jena); and Holub, T.; Risse, S.; Eberhardt, R. (Fraunhofer Institute for Applied Optics and Precision Engineering IOF Jena) - Static Stiffness Tuning Method of Linear Motion Guide of Machine Tool
Kim, Y.; Lee, C.-H.; Lee, J.-H.; Ha, T.-H. (Korea Institute of Machinery & Materials (KIMM)) - Dynamic Surface Roughness Profiler
Kimbrough, B.T.; Brock, N.; Millerd, James E. (4D Technology) - Micro-fabrication of Macroscopic Transfer Artifact
Lemmons, T. D.; Hocken, R. J.; Overcash, J. L. (University of North Carolina at Charlotte) - Modeling of Ballscrew Nut Stiffness Including Thermal Effect
Min, B.-K.; Chung, S.-C. (Hanyang University); and Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)) - C-LVDT Toolset Station for Uses in Diamond Machining
Owen, J. D.; Dutterer, B. S.; Davies, M. A. (University of North Carolina at Charlotte) - Uncertainty Modeling of Ballscrew Nut Stiffness
Park, C.-I.; Min, Bok-Ki; Chung, S.-C. (Hanyang University); and Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)) - The Three-bead Kinematic Coupling
Shelef, B.; Erez, S. (g2 Engineering)
Precision Machining Processes
- Precision Wear Inspection of Single-Crystal Diamond Tool Used in Electroless Nickel Turning
Chon, K. S. (Catholic University of Daegu); Takahashi, H. and Namba, Y. (Chubu University) - Face Grinding Monitoring and Optimization Through Force Measurements
Deakyne, T. R.; Marsh, E. R.; Keller, E. E. (The Pennsylvania State University); Vallance, R. R.; Koh; K. H. (nanoPrecision Products); and Knapp, B. R. (Professional Instruments Company, Inc.) - Modeling the Polishing Process With Resilient Diamond Tools for Manufacturing of Complex Shaped Ceramic Implants
Denkena, B.; Köhler, J.; Turger, A. (Leibniz Universität Hannover) - Suppression of Tool Wear in Diamond Turning of Steels by Surface Modification — Effect of Carburizing
Furushiro, N.; Yamaguchi, T. (Kansai University); Terauchi, S.; Matsuda, S. (Osaka Yakin Kogyo Co., Ltd.); and Shimada, S. (Osaka Electro-Communication University) - Effect of Vacuum on Wire-sawing as Preliminary Experiment to Lunar Exploration
Furutani, K.; Fukunaga, S. (Toyota Technological Institute); Okada, T. (Institute of Space and Astronautical Science, JAXA); Saiki, K. (Osaka University); and Ohue, H. (Tokusen Kogyo) - Investigation Into Surface Characteristics of Cylindrical Components Machined using Wire Electrical Discharge Turning (WEDT) Process
Giridharan, A.; Samuel, G. L. (Indian Institute of Technology Madras) - Manufacturing of High Quality Surfaces on a Fine Grinding Machine With Lapping Kinematics
Hoffmeister, H.-W.; Hahmann, W.-C. (Technical University of Braunschweig) - Superfinishing of Bearing Rings Using Elastic Bonded Grinding Wheels
Hoffmeister, H.-W.; Hahmann, W.-C. (Technical University of Braunschweig) - Subcomponent Developments for a Vortex Machining Test Facility
Howard, S. C.; Chesna, J. W.; Mullany, B. A.; Smith, S. T. (University of North Carolina at Charlotte) - Effects of Internal Micro-defects on Diamond Tool Wear in Precision Cutting — Micro FT-IR Analysis for Internal Micro-defects at the Tool Edge –
Kaneeda, T.; Torigoe, H.; Iwashita, H. (Okayama University of Science); Shimada, S. (Osaka Electro-Communication University); Obata, K. (Allied Material Ltd.); and Anthony, L. (Waseda University) - Bayesian Updating Using the Markov Chain Monte Carlo Method to Determine Force Coefficients in End Milling
Karandikar, J. M.; Schmitz, Tony L. (University of Florida); and Abbas, A. E. (University of Illinois at Urbana-Champaign) - Production of TiB 2 Based Ti-B-C Coated Tools for Cutting Titanium Alloy
Kohzaki, M. (Tokai University) - Optimization of Elliptical Vibration Assisted Machining Process Through Finite Element Modeling
Lane, B. M.; Dow, T. A.; Scattergood, R. O. (North Carolina State University) - Through-hole Drilling of Soda-lime Glass Plate Using Electroplated Diamond Tool
Mizobuchi, A. (The University of Tokushima); and Ogawa, H. (Tokushima Prefectural Industrial Technology Center) - Improvement of F inishing Efficiency Considering Contact Behavior of Polishing Pad with Workpiece Surface
Naito, T.; Sato, M.; Satake, U.; Hirose, K.; Enomoto, T. (Osaka University) - Improvement of Tool Wear Resistance in Steel Cutting by Textured Surface
Sugihara, T.; Enomoto, T. (Osaka University) - Ultraprecision Microgrooving on Hard Material with Tool Wear Suppression
Tang, X.; Nakamoto, K.; Ishida, T.; Takeuchi, Y. (Osaka University); and Obata, K. (A.L.M.T. Corporation) - Internal Laser Marking for Higher Retained Strength
Zhang, C. (Corning Incorporated)
Precision Manufacturing
- Microfinishing Precision-ground Surfaces Using Flatstones
Arneson, H.; Arneson, D. A.(Professional Instruments Company) - Balancing Air Bearing Spindles for Servo Track Writers
Buezis, M. L.; Knapp, B. R. (Professional Instruments Company, Inc.) - Assembling & Testing a Tapered Roller Bearing Spindle
Hahn, T.; Liebers, M. J.; Arneson, D. A.; Knapp, B. R. (Professional Instruments Company, Inc.) and Marsh, E. R. (The Pennsylvania State University) - An Air Compressor System for Precision Air Bearing Spindles
Haugen, S.; Arneson, D. A.; Oss, D. D.; Sanner, S. L. (Professional Instruments Company, Inc.) - A New Machining Cost Calculator (MC2)
Johnson, M.; Schmitz, T. L. (University of Florida) - Design of a Cryogenic Target for Indirect Drive Ignition Experiments on NIF
Kroll, J. J.; Bhandarkar, S.; Edson, S. L.; Gonzales, S.; Horner, J. B.; Ellefson, J.; Mapoles, E. R.; Dzenitis, E. G.; Montesanti, R. C.; Taylor, J. S. (Lawrence Livermore National Laboratory); Vonhof, S. A.; Howland, F. (Akima Infrastructure Services, LLC); and Alger, E. T. (General Atomics) - Misaligned Bearings Cause Oval Errors and Size Variations
Liebers, M. J.; Sanner, S. L.; Knapp, B. R.(Professional Instruments Company, Inc.); and Sheridan, T. (Lorien Consultants Group, Inc.) - Thickness Measurements of the Gas Distribution Layer for a Direct Methanol Fuel Cell
Pope, M.; Schmitz, T. L.; Cox, P. (University of North Florida) - Freeform Mirror Fabrication by Means of Fast Tool Servo Diamond Turning
Scheiding, S.; Risse, S.; Gebhardt, A.; Damm, C.; Eberhardt, R.; Tünnermann, A. (Fraunhofer Institute for Applied Optics and Precision Engineering (IOF)) - Moore’s Law, the Cloud, the Internet of Things and Precision Engineering
Smythe, R.A. (R.A.Smythe, LLC) - Web-based Draft Inspection System for Design and Fabrication of Precision Molds
Song, I.-H.; HChung, S.-C. (Hanyang University) - An Inexpensive Device to Test Climate Control Systems in a Manufacturing Environment
Stussi, D. R. (Gardner Stussi Tool & Die) - A Study of Influence of Long-period Ground Motion on Semiconductor Industry
Takahashi, M.; Tatsuzaki, Y.; Yamamoto, K.; Nakashini, Tsutomu (Nikon Corporation) - Deterministic Fabrication of NIC Targets
Taylor, J. S.; Montesanti, R. C.; Dzenitis, E. G.; Kroll, J. J.; Horner, J. B.; Edson, S. L.; Bhandarkar, S.; Castro, C.; Reynolds, J. L.; Johnson, M. A.; Hamza, A. V. (Lawrence Livermore National Labs); and Alger, E. T.; Nikroo, A. (General Atomics Corporation) - Fundamental Study of Coating Using Electrically Powered Sliders
Watanabe, A.; Yoshida, T.; Mizoguchi, T.; Kobayashi, Y.; Shirai, K. (Nihon University) - Application of Printed Electronics to SAW Devices on Mobile WiMAX/WiFi Systems
Watanabe, T. (World Technology Instruments Co., Ltd.) - Application of Precision Engineering in Laser Transverse Pumping 133Cs Brain Magnetometers
Watanabe, T. (World Technology Instruments Co., Ltd.)
Precision Metrology
- Simulation of Stylus Contact Patterns in Profilometry
Althagafy, K. T.; Chetwynd, D.G. (University of Warwick) - Coordinate Metrology Based on Maximum Conformance to Tolerances for Closed-loop Fabrication
Barari, A. (University of Ontario Institute of Technology) - Automatic Valve Inspection of Fuel Injection Nozzles with a Focus Variation Instrument
Danzl, R. ; Helmli, F.; Scherer, S. (Alicona Imaging GmbH) - Metrology of Bullets and Cartridge Casings
Garrard, K. P.; Dow, T. A.; Sohn, A. (North Carolina State University) - Multi-probe Error Separation Applied to Roundness Circular Flatness and Angularity
Hale, L. C.; Ummethala, U.; Hench, J. (KLA-Tencor) - Precise Sorting System of Rolling Elements for Bearing
Hanaoka, H.; Yamazaki, H.; Kino, M.; Handa, J.; Kaneko, N. (Harmonic Drive Systems Inc.); and Uda, Y. (Osaka Electro-Communication University) - Error Motion Estimation of a Hydrostatic Spindle
Hwang, J.; Shim, J.; Kim, J.-H.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)) - Development of a Laser-guided Deep-hole Measurement System With Mechanical High Performance Actuators
Katsuki, A.; Sajima, T.; Ohnishi, O.; Doi, T. (Kyushu University 36); Sato, T.; Ali, M. D. Hazrat (Kyushu University); Murakami, H. (Kyushu Sangyo University); and Berjaud, A. (Institut Français de Mécanique Avancée – IFMA) - Multi-Probe Error Separation to Eliminate the Influence of Ball Bearing Spindle Motion in Process Measurements
Keller, E. E. (The Pennsylvania State University) - Design, Manufacture and Testing of Nanometer-level Spindle Metrology Testballs
Knapp, B. R.; Arneson, D. A.; Liebers, M. J. (Professional Instruments Company, Inc.); and Marsh, E. R.; Keller, E. E. (The Pennsylvania State University) - Anisoelastic Sources of Error Motions
Liebers, M. J.; Sanner, S. L.; Knapp, B. R. (Professional Instruments Company, Inc.); Sheridan, T. (Lorien Consultants Group, Inc.); and Dalrymple, T. M. (University of Florida) - Vertical-axis Effects on Spindles
Liebers, M. J.; Sanner, S. L.; Knapp, B. R.; Sheridan, T. (Lorien Consultants Group, Inc.); and Dalrymple, T. M. (University of Florida) - Looking In vs. Looking Out at Error Motion and Eccentricity
Liebers, M. J.; Sanner, S. L.; Knapp, B. R.; Sheridan, T. (Lorien Consultants Group, Inc.) and Dalrymple, T. M. (University of Florida) - Determine of Sub 50 nm CD Metrology Using by AFM
Liou, H.-C.; Pan, S.-P. (Center for Measurement Standards/ITRI) - Design of a Test Platform to Investigate the Role of Process Vibrations in Precision Polishing
Mainuddin, M.; Browy, E.; Mullany, B. A. (University of North Carolina at Charlotte) - A Short-range Error Evaluation of a Wavelength Modulation Encoder
Makinouchi, S.; Watanabe, A.; Takasaki, M. (Nikon Corporation); and Ohara, T.; Ong, J.H. (Nanowave Inc.) - Evaluating Possible Test Artifacts for Five-Axis Machine Tools
Moylan, S. P.; McGlauflin, M. L.; Fesperman Jr., R. R.; Donmez, M. A. (Nat’l Institute of Standards & Technology); and Blumenfeld, D. (Pennsylvania College of Technology) - Development of an Optical Measurement System for Five-Degrees-of-Freedom Error Motions of a Micro High-Speed Spindle
Murakami, H. (Kyushu Sangyo University); and Katsuki, A.; Onikura, H.; Sajima, T. (Kyushu University) - Non-contact Dimensional Measurements of Bipolar Fuel Cell Plates
Muralikrishnan, B.; Ren, W.; Everett, D. S.; Stanfield, E. S.; Doiron, T. D. (National Institute of Standards and Technology) - Metrology of a Precision Plasmonic Lithography Stage
Ni, K.; Miller, J. A.; Hocken, R. J. (University of North Carolina at Charlotte) - Measuring Positioning Accuracy of Large Machine Tools
Olarra, A.; Zubieta, M.; Gomez-Acedo, E.; Kortaberria, G. (Tekniker – IK4 Technology Center) - Precision Engineering in the Construction and Alignment of the NIST Calculable Capacitor
Pratt, J. R.; Wang, Y.; Brandenburg, N.; Stoup, J. R.; Lee, R.; Durand, M.; Lawall, J. R. (National Institute of Standards and Technology) - The New ISO 10360-7:2011
Salsbury, J. G. (Mitutoyo America Corporation) - Measurement Uncertainty of High Energy Density Science Target Assemblies for the National Ignition Facility
Seugling, R. M.; Nederbragt, W. W.; Wilson, M. J.; Blobaum, K. J. M.; Peterson, S. C.; Lord, D. (Lawrence Livermore National Laboratory) - Thickness and Stack Height Measurement Uncertainty of Experimental Packages for National Ignition Facility Targets
Seugling, R. M.; Nederbragt, W. W.; Wilson, M. J.; Blobaum, K. J. M.; McClure, M. D.; Bennett, D. W.; Mercado, G. A.; Vargas, R. J. (Lawrence Livermore National Laboratory) - Simulation and Experimental Investigation on Radial Run-out Error of Rotary Air Bearing Tables
Shim, J.; Hwang, J.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)) - Three-dimensional Surface Profile Measurement by Shape-from-focus Method Using MEMS Mirror Orojector
Tanaka, S.; Mizutani, Y.; Iwata, T. (The University of Tokushima) - Measurement and Compensation of Bar-mirror Flatness And Squareness Error Using High Precision Stage
Woo, S.; Ahn, D. H.; Gweon, D.G. (Korea Advanced Institute of Science & Technology (KAIST)); and Lee, S. H.; Park, J. (EVERTECHNO Co., Ltd.)