ASPE Proceedings, October 31, 2010 - November 4, 2010

To review a PDF version of the abstract, click on the title. If the title is not highlighted, a PDF version of the paper is not available. Contact ASPE to purchase a copy of the Proceedings. ASPE does not offer individual abstracts for sale.


Session I Applications of Precision Engineering in Manufacturing
Tuesday, November 2, 2010, 8:30 AM - 10:00 AM
Session Chair: Bradley H. Jared (Sandia National Laboratories) and Pradeep K. Subrahmanyan (Data Physics Corporation)

  1. Fabrication of Periodic Metal Nanodots Arrays
    Sun, J.; Shu, W.; Luo, X.; Ritchie, J. M.; Chang, W. (Heriot-Watt University
    Applications of Precision Engineering in Manufacturing/Oral/Abstract/2010 Annual
  2. Improved Spindle Dynamics Identification Techniques for Receptance Coupling Substructure Analysis (RCSA)
    Kumar, U. V.; Riggs, A. W.; Schmitz, T. L. (University of Florida
    Applications of Precision Engineering in Manufacturing/Oral/Abstract/2010 Annual
  3. Figuring of Millimeter-thick Elliptical Mirror Substrate Using Numerically Controlled Local Wet Etching with Low-pressure Polishing
    Nagano, M.; Yamaga, F.; Zettsu, N.; Yamamura, K. (Osaka University); and Yamazaki, D.; Maruyama, R.; Soyama, K. (J-PARC Center, Japan Atomic Energy Agency)
    Applications of Precision Engineering in Manufacturing/Oral/Abstract/2010 Annual
  4. Using Process Models to Optimize Modulated Tool-path Chip Breaking Operations
    Barkman, W. E.; Babelay Jr., E. F. (Babcock & Wilcox Technical Services, LLC); and Smith, K. S.; Assaid, T. S.; McFarland, J. T.; Tursky, D. A. (University of North Carolina at Charlotte)
    Applications of Precision Engineering in Manufacturing/Oral/Abstract/2010 Annual

Session II Metrology
Tuesday, November 2, 2010, 10:30 AM - 12:00 PM
Session Chair: Brian P. O'Connor (Aerotech, Inc.) and Marcin B. Bauza (InsituTec Inc.)

  1. Self-referenced Surface Profilometry
    Parks, R. E.; Su, P.; Oh, C. J.; Burge, J. H. (University of Arizona)
    Metrology/Oral/Abstract/2010 Annual
  2. Advanced 3D Metrology to Enhance Manufacturing of Precision Components
    Novak , E.; Schmit, J.; Munteanu, F. (Brucker Nano Surfaces Business)
    Metrology/Oral/Abstract/2010 Annual
  3. Test Methods for Coordinated Motion of Five-axis Machining Centers
    Moylan, S. P.; Fesperman Jr., R. R.; Donmez, M. A. (National Institute of Standards and Technology)
    Metrology/Oral/Abstract/2010 Annual
  4. Uncertainty of Angular Motion Correction Using the Extended Abbe Principle
    Lee, V.; Ziegert, J. C. (Clemson University); and Estler, W. T.; Phillips, S. D.; Sawyer, D.; Borchardt, B. (National Institute of Standards and Technology)
    Metrology/Oral/Abstract/2010 Annual
  5. Record Resolution Absolute Length Metrology Over Large Distances
    Roos, P. A.; Reibel, R. R.; Berg, T. J.; Kaylor, B. M.; Greenfield, N. J. (Bridger Photonics, Inc.); and Barber, Z. W. (Montana State University)
    Metrology/Oral/Abstract/2010 Annual

Session III Precision Surface Generation
Wednesday, November 3, 2010, 8:30 AM - 10:00 AM
Session Chair: Mark A. Stocker (Cranfield Engineering) and Robert D. Grejda (Corning Tropel Corporation)

  1. Direct Diamond Turning of Aspheric Steel Molds with Ultra Precise Accuracy
    Klocke, F.; Dambon, O.; Bulla, B. (Fraunhofer Institute for Production Technology IPT)
    Precision Surface Generation/Oral/Abstract/2010 Annual
  2. Laser Generated and Structured Prototypes of Diamond Tool Tips for Microoptics Fabrication
    Joswig, A.; Tünnermann, A. (University of Jena) and Risse, S.; Eberhardt, R. (Fraunhofer Institute for Applied Optics and Precision Engineering)
    Precision Surface Generation/Oral/Abstract/2010 Annual
  3. Ulra-precision Fluid Jet and Bonnet Polishing for Next Generation Hard X-ray Telescope Application
    Beaucamp, A. (Zeeko Research Ltd.); and Matsumoto, A.; Namba, Y. (Chubu University)
    Precision Surface Generation/Oral/Abstract/2010 Annual
  4. Plasma Assisted Polishing of Reaction-sintered Silicon Carbide
    Yamamura, K.; Ueda, M.; Takiguchi, T.; Zettsu, N. (Osaka University)
    Precision Surface Generation/Oral/Abstract/2010 Annual

Session IV Metrology with Nanometer Scale Resolution
Wednesday, November 3, 2010, 10:30 AM - 12:00 PM
Session Chair: Hans-Jochen Trost (MicroFab Technologies, Inc.) and Deming Shu (Argonne National Laboratory)

  1. Aspects of Probing on the Micro Scale
    Bos, E. (Xpress Precision Engineering B.V.)
    Metrology with Nanometer Scale Resolution/Oral/Abstract/2010 Annual
  2. Development of a System for 3-D Micro Metrology Using an Optical Fiber Probe
    Murakami, H. (Kyushu Sangyo University); Katsuki, A.; Onikura, H.; Sajima, T. (Kyushu University); and Kawagoishi, N.; Kondo, E. (Kagoshima University)
    Metrology with Nanometer Scale Resolution/Oral/Abstract/2010 Annual
  3. Dimensional Measurements of Ultra Delicate Materials Using Micrometrology Tactile Sensing
    Bauza, M. B.; Woody, S. C. (InsituTec Inc.); Seugling, R. M.; (Lawrence Livermore National Laboratory); and Smith, S. T. (University of North Carolina at Charlotte)
    Metrology with Nanometer Scale Resolution/Oral/Abstract/2010 Annual
  4. Microprobe Metrology Study: Latest Results
    RisseYang, R. H.; Smith, S. T. (University of North Carolina at Charlotte); and de la Maza, B. (Asociación Innovalia)
    Metrology with Nanometer Scale Resolution/Oral/Abstract/2010 Annual
  5. ISARA 400: Enabling Ultra-precision Coordinate Metrology for Large Parts
    Donker, R. L.; Widdershoven, I.; Brouns, D. S. G.; Morel, M.; Spaan, H. A. M. (IBS Precision Engineering BV)
    Metrology with Nanometer Scale Resolution/Oral/Abstract/2010 Annual

Session V Design of Precision Machines I
Wednesday, November 3, 2010, 1:30 PM - 3:00 PM
Session Chair: Session Chair: Thomas A. Dow (North Carolina State University) and Craig R. Forest (Georgia Institute of Technology)

  1. Compact Manipulator Based on an Atomic Force Microscope for Multi-probe Operation
    Iwata, F.; Kou, H.; Mizuguchi, Y.; Ito, S. (Shizuoka University); Aoyama, H. (University of Electro- Communictions); and Ushiki, T. (Niigata University)
    Design of Precision Machines I/Oral/Abstract/2010 Annual
  2. A Fast Scanner Design for a Scanning Multi-probe Microscope
    Lin, F.; Smith, S. T.; Moyer, P. J.; Parker, W. C.;(University of North Carolina at Charlotte)
    Design of Precision Machines I/Oral/Abstract/2010 Annual
  3. Three Fingered Hand for a Micro-robotic Assembly System
    SchluchterHastings, D. J.; Graham, J.; Nowakowski, B. K.; Smith, S. T.; Tomblin, Jr., J. E. (University of North Carolina at Charlotte)
    Design of Precision Machines I/Oral/Abstract/2010 Annual
  4. Design and Characterization of a 6 Degree-of-freedom Meso-scale Nanopositioner with Integrated Strain Sensing
    MakinouchiDiBiasio, C. M. (The Charles Stark Draper Laboratories); and Culpepper, M. L. (Massachusetts Institute of Technology)
    Design of Precision Machines I/Oral/Abstract/2010 Annual
  5. Advancements in Development of an Ultra-precision, SI-traceable Nanoindentation Platform
    Nowakowski, B. K.; Smith, S. T. (University of North Carolina at Charlotte); and Smith, D. T. (National Institute of Standards and Technology)
    Design of Precision Machines I/Oral/Abstract/2010 Annual

Session VI Controls
Thursday, November 4, 2010, 8:30 AM - 10:00 AM
Session Chair: Stephen J. Ludwick (Aerotech, Inc.) and Luis A. Aguirre (3M Company, Inc.)

  1. Open Loop Inertial Cross-talk Compensation Based on Measurement Data
    Steinlin, M.; Weikert, S.; Wegener, K.; (inspire AG, ETH Zürich)
    Controls/Oral/Abstract/2010 Annual
  2. 2-D Absolute Positioning System for Real Time Control Applications
    Montes-Solano, C. A.; Ziegert, J. C.; Wong, C.; Mears, L. (Clemson University); and Tucker, T. (Tucker Innovations Inc.)
    Controls/Oral/Abstract/2010 Annual
  3. Practical Friction Compensation for Ultra Precision Point-to-point Motion
    Bucci, B. A.; Cole, D. G.; Vipperman, J. S. (University of Pittsburgh); and Ludwick, S. J. (Aerotech, Inc.)
    Controls/Oral/Abstract/2010 Annual
  4. A Multirate Multiprocessor Control Platform for High-speed Precision Motion Control
    Smeds, K.; Lu, X. (The University of British Columbia)
    Controls/Oral/Abstract/2010 Annual
  5. Time-Optimal Minimum Jerk Trajectory Generation for 5-Axes Laser Drilling Applications
    Alzaydi, A. A.; Erkorkmaz, K. (University of Waterloo); Elfizy, A.; Engin, S. (Pratt & Whitney Canada)
    Controls/Oral/Abstract/2010 Annual

Session VII Design of Precision Machines II
Thursday, November 4, 2010, 10:30 AM - 12:00 pm
Session Chair: Keith Carlisle (Lawrence Livermore Natinal Laboratory) and Jonathan D. Ellis (Delft University of Technology)

  1. High-accuracy Atomic Force Microscope for Dimensional Metrology
    Amin-Shahidi, D.; Ljubicic, D. M.; Trumper, D. L. (Massachusetts Institute of Technology); and Overcash, J. L.; Hocken, R. J. (University of North Carolina at Charlotte)
    Design of Precision Machines II/Oral/Abstract/2010 Annual
  2. Design and Testing of a Machine for Calibration of Ball Bars Up to 3 Meters in Length
    Lee, V.; Ziegert, J. C. (Clemson University); and Estler, W. T.; Phillips, S. D.; Sawyer, D. S.; Borchardt, B. R. (National Institute of Standards and Technology)
    Design of Precision Machines II/Oral/Abstract/2010 Annual
  3. Positioning System for Optical Disc Mastering
    Knapp, B. R.; Arneson, D. A.; Oss, D. D. (Professional Instruments Company, Inc.)
    Design of Precision Machines II/Oral/Abstract/2010 Annual
  4. An Instrument for Controlled, Automated, Continuous Pulling of Sub-micrometer Fused Silica Pipettes
    Pak, N.; Dergance, M.; Emerick, M.; Gagnon, E.; Forest, C. R. (Georgia Institute of Technology)
    Design of Precision Machines II/Oral/Abstract/2010 Annual

Session VIII Interferometry and Optics
Thursday, November 4, 2010, 1:30 AM - 3:00 PM
Session Chair: Vivek G. Badami (Zygo Corporation) and Eric S. Buice (Lawrence Livermore National Laboratory)

  1. Expanding White Light Interferometer Capabilities to be Used as a µ-CMM
    Ramasamy, S. K.; Kasper, A. (Hutchinson Technology Inc.)
    Interferometry and Optics/Oral/Abstract/2010 Annual
  2. Fourier Transform and Wavelet Algorithms for Calculating Height in White Light Interferometry
    Medicus, K.M.; Jansen, M. J. (Mitutoyo Research Center Europe)
    Interferometry and Optics/Oral/Abstract/2010 Annual
  3. Errors in Measurement and Compensation Algorithms for Periodic Nonlinearity Correction
    Ellis, J. D.; Baas, M.; Spronck, J. W.; Munnig Schmidt, R.-H. (Delft University of Technology)
    Interferometry and Optics/Oral/Abstract/2010 Annual
  4. Terahertz Time of Flight Detection for Absolute Thickness Measurements of Single Side Polished Silicon Wafers
    Ikram, J.; Farahi, F.; Her, T-H.(University of North Carolina at Charlotte)
    Interferometry and Optics/Oral/Abstract/2010 Annual

Poster Session
Tuesday, November 2, 2010, 3:30 PM - 5:00 PM Wednesday, November 3, 2010, 3:30 PM - 5:00 PM

Applications of Precision Engineering in Manufacturing

  1. Precision Micro-engraving of Glass by Automatic Boundary Tracking of Complex Images
    Chung, S.-C. (Hanyang University)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  2. Process Optimization in Semi-liquid Injection Molding of AZ91D Magnesium Alloy
    Chung, S.-C. (Hanyang University)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  3. Analysis of Ballscrew Stiffness Owing to Contact Deformation in Leadscrew Systems
    Chung, S.C. (Hanyang University); and Park, C.-H. (Korea Institute of Machinery & Materials (KIMM))
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  4. Sensor Design for On-machine Probing of Extruded Tool Joints
    Graziano, A.; Schmitz, T. L. (University of Florida); and Joslin, A. (University of Central Florida)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  5. Internal Finishing of Capillary Tubes by Magnetic Abrasive Finishing Using a Metastable Austenitic Stainless Steel Tool
    Kang, J.; Yamaguchi, H. (University of Florida)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  6. Combining Tool Wear and Stability in High-speed Machining Performance Prediction
    Karandikar, J. M.; Zapata Ramos, R. E.; Schmitz, T. L. (University of Florida)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  7. Reduction of NC Machining Data Volume and Evaluation of Machined Surface by Circular Arc Approximation of Discrete Points
    Kawasaki, K.; Murata, T.; Kobayashi, Y.; Shirai, K. (Nihon University); and Kondo, T. (Hakodate National College of Technology)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  8. Microfabrication of Circular Cross-section Microchannels for Thrombosis Assays
    Li, M.; McKinnon, M.; Forest, C. R. (Georgia Institute of Technology); and Chase, S. (Rose-Hulman Institute)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  9. Friction Measurement in Precision Glass Molding
    Mosaddegh, P.; Ziegert, J. C. (Clemson University); Tohme, Y. E. (Moore Nanotechnology Systems, LLC)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  10. Design, Fabrication and Testing of a High Precision Piezo-actuated Air Amplifier as an Ion Focusing Device in Mass Spectrometry
    Robichaud, G.; Dixon, R. B.; Potturi, A. S.; Edwards, J. R.; Sohn, A.; Dow, T. A.; Muddiman, D. C. (North Carolina State University)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual
  11. Design of a Monolithic Cylindrical Flexure for Precision Linear Motion Guidance
    Telleria, M. J.; Culpepper, M. L.; Weitz, D. (Massachusetts Institute of Technology)
    Applications of Precision Engineering in Manufacturing/Poster/Abstract/2010 Annual

Control of Precision Machines and Processes

  1. Active Reduction of a Static Deformation in a Moving Magnet Planar Actuator
    Achterberg, J.; van Lierop, C. M. M.; van den Bosch, P. P. J. (Eindhoven University of Technology)
    Control of Precision Machines and Processes/Poster/Abstract/2010 Annual
  2. Microcapsule Production by Double Micro Pipette Injecters
    Aoyama, H.; Hata, N.; Terasaki, K.; Hirata, S. (University of Electro-Communications)
    Control of Precision Machines and Processes/Poster/Abstract/2010 Annual
  3. High Speed Electrical Discharge Machining Using a Combination of 5-DOF Controlled Maglev Actuator and Conventional EDM Machine
    He, D.; Shinshi, T. (Tokyo Institute of Technology); Zhang, X. (Nippon Institute of Technology); and Yuzawa, T.; Sato, T. (Mitsubishi Electric Corporation)
    Control of Precision Machines and Processes/Poster/Abstract/2010 Annual
  4. Performance Evaluation of a New High-precision, Quick-response Pneumatic Pressure Regulator and Its Application to an Actively Controlled Pneumatic Vibration Isolator
    Kato, T. (Fukuoka Institute of Technology); Funaki, T. (National Metrology Institute of Japan (AIST)); Shinohara, Y. (Tokkyokiki Corporation); Kawashima, K.; Kagawa, T. (Tokyo Institute of Technology)
    Control of Precision Machines and Processes/Poster/Abstract/2010 Annual
  5. Precision Three Dimensional Modeling for Spatial Control of the Ion Beam Sputtering Process for Optical Thin Films
    Ness, D. C.; Wood, C. S. (Precision Photonics Corporation)
    Control of Precision Machines and Processes/Poster/Abstract/2010 Annual

Design and Fabrication of Structured Surfaces

  1. Use of Ceramic Spotting Masters for Scraping
    Stussi, D. R. (Gardner Stussi Tool & Die)
    Design and Fabrication of Structured Surfaces/Poster/Abstract/2010 Annual
  2. Improving Anti-adhesive Properties of Cutting Tool Surface by Nano/Micro Textures -- Considering the Texture Patterns
    Sugihara, T.; Enomoto, T. (Osaka University)
    Design and Fabrication of Structured Surfaces/Poster/Abstract/2010 Annual

Design of Precision Machines and Instruments

  1. Design of Flexure Hinge Mechanism for Dynamic Yaw Control of FPD Lithography Stage
    Ahn, D. H.; Kim, H.; Gweon, D.-G.; (Korea Advanced Institute of Science & Technology); and Lee, S. H.; Choi, W.; Baek, S.; Lee, S.; Park, J. (EVERTECHNO Co., Ltd.)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  2. Accurate Stiffness Analysis of Parallel Leaf-spring Flexures
    Brouwer, D. M.; Meijaard, J. P.; Jonker, J. B. (University of Twente)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  3. 6 DOF Nanopositioning Mechanism and Analysis of its Inherent Mechanical Characteristics
    Hackel, T.; Frank, T.; Lotz, M. (Technical University of Ilmenau)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  4. The Measurement of Meso-scale Torsion Springs
    Jared, B. H.; Yazzie, D.; Reese, I. M. (Sandia National Laboratories)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  5. Design and Fine Motion Test of Precision X-Theta Stage in Vacuum
    Khim, G.; Shim, J.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM))
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  6. Design of Novel 3-DOF Nano Precision Stage
    Kim, H.-Y.; Ahn, D. H.; Gweon, D.-G. (Korea Advanced Institute of Science and Technology (KAIST)); and Chun, B.-S. (Nanoscope System Co. Ltd.)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  7. Design and Performance of Telescoping Micropipette Arrays for High Throughput in Vivo Patch Clamping
    Kodandaramaiah, S. B.; Malik, S.; Dergance, M. J.; Forest, C. R. (Georgia Institute of Technology); and Boyden, E. S. (Massachusetts Institute of Technology)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  8. Comparing Different Cooling Concepts for Ball Screw Systems
    Mayr, J. (IWF - ETH Zurich); Ess, M.; Weikert, S.; Wegener, K. (inspire AG, ETH Zurich)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  9. Measurements Using the High Accuracy Atomic Force Microscope and the Sub-atomic Measuring Machine
    Overcash, J. L.; Hocken, R. J. (University of North Carolina at Charlotte); and Amin-Shahidi, D.; Trumper, D. L.; Schattenburg, M.L. (Massachusetts Institute of Technology)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  10. Modulation of Electromagnetic Radiation Using a Dot Matrix Printer
    Pak, N.; Phaneuf, C. R.; Kodandaramaiah, S. B.; Forest, C. R. (Georgia Institute of Technology)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  11. Parametric Modeling of Self-weighted Distortion for Plane Optical Mirrors
    Park, W. H.; Cuerden, B.; Burge, James H. (University of Arizona); and Kim, S.-W. (Yonsei University)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual
  12. Bench-top Precision Glass Molding Machine
    Wachtel, P.; Mosaddegh, P.; Gleason, B.; Musgraves, J. D.; Richardson, K. A. (Clemson University); and Dubas, B.; Painter, H. (Dyna Technologies, Inc.)
    Design of Precision Machines and Instruments/Poster/Abstract/2010 Annual

Dimensional Metrology

  1. Interferometric Measurment of the Low Value CTE of a Ball Bar
    Miller, J. A.; Saad, M. E.-S.; Caskey, G. W. (University of North Carolina at Charlotte); and Aguilar-Martin, J. J. (Universidad de Zaragoza)
    Dimensional Metrology/Poster/Abstract/2010 Annual
  2. Double Sided Interferometer, Profiling Measurement Simultaneously Yields Thickness and Form
    Seugling, R. M.; Wilson, M. J.; Davis, P. J.; Peterson, S. C.; Hamilton, J. H. (Lawrence Livermore National Laboratory)
    Dimensional Metrology/Poster/Abstract/2010 Annual
  3. Measurements of Coating Thickness of Diamond-coated Tools by White-light Interferometry
    White, W. R.; Ogilvie, A.; Chou, Y. K. (The University of Alabama); and Novak, E. L. (Bruker Nano Surfaces Business)
    Dimensional Metrology/Poster/Abstract/2010 Annual

Grinding, Polishing, and Lapping

  1. A Study of Machining Strategy in Computer Controlled Ultra-precision Polishing of Structured Surfaces
    Cheung, C.-F.; Ho, L. T.; Kong, L. B. (The Hong Kong Polytechnic University)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual
  2. Contact Conditions for 5-axis Grinding of Free Formed Surfaces
    Denkena, B.; Köhler, J.; Behrens, L.; Krawczyk, T. (Leibniz Universität Hannover)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual
  3. Grinding of Microstructures in Brittle Materials with Multiple Microprofiled Grinding Wheels
    Denkena, B.; Köhler, J.; Kästner, J.; Hahmann, D. (Leibniz Universität Hannover)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual
  4. Weakly Copper-fullerenol Layer on Chemical Mechanical Polishing Using Water Soluble Fullerenol
    Kishida, H.; Takaya, Y.; Hayashi, T.; Michihata, M.; Kokubo, K. (Osaka University)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual
  5. Vibration Attenuation in Optical Pitch
    Mainuddin, M.; Mullany, B. A. (University of North Carolina at Charlotte)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual
  6. Increases in Corrosion Resistance and Water Repellency of Metal Mold Surface by EB Polishing
    Okada, A.; Uno, Y. (Okayama University); and Uemura, K. (Nagata Seiki Co. Ltd.)
    Grinding, Polishing, and Lapping/Poster/Abstract/2010 Annual

Machine Tool Metrology

  1. New Method for Determination of Volumetric Positioning Error
    Bui, C. B; Hwang, J.; Lee, C.-H.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM))
    Machine Tool Metrology/Poster/Abstract/2010 Annual
  2. Methods, Practices and Standards for Evaluating On-machine Touch Trigger Probing of Workpieces
    Fesperman Jr., R. R.; Moylan, S. P.; Donmez, M. A. (National Institute of Standards and Technology)
    Machine Tool Metrology/Poster/Abstract/2010 Annual
  3. An Estimation Method for Five Degree Freedom Error Motions of the Precision Spindle
    Hwang, J.; Shim, J.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM))
    Machine Tool Metrology/Poster/Abstract/2010 Annual
  4. Positioning Repeatability Evaluation of Hydrostatic Bearing Guided Precision Machine
    Shim, J.; Hwang, J.; Song, C. K.; Park, C.-H. (Korea Institute of Machinery & Materials (KIMM)); and Bui, C. B. (University of Science and Technology)
    Machine Tool Metrology/Poster/Abstract/2010 Annual

Measurement Uncertainty

  1. Manufacturing Process Error Signature and CMM Uncertainty Costs
    Ceglarek, D. (University of Warwick); and Moroni, G.; Petrò, S. (Politecnico di Milano)
    Measurement Uncertainty/Poster/Abstract/2010 Annual
  2. Investigations of Metrological Models for the Nanomeasuring and Nanopositioning Machine with Respect to the Measurement Uncertainty by Means of a Monte Carlo Simulation
    Kreutzer, P.; Füßl, R; Manske, E.; Dorozhovets, N. (Ilmenau University of Technology)
    Measurement Uncertainty/Poster/Abstract/2010 Annual
  3. Short Range Displacement Sensor Using Optical Pick-up Tracking Signal
    Lee, C.-W.; Song, J.-Y.; Ha, T.-H.; Lee, J.-H. (Korea Institute of Machinery & Materials (KIMM))
    Measurement Uncertainty/Poster/Abstract/2010 Annual

Micro-Electromechanical Devices

  1. Non-lithographic Fabrication of Carbon Nanotube-based Sensors for Small-scale Force and Displacement Sensing
    Cullinan, M. A.; Panas, R. M.; Daniel, C. R.; Culpepper, M. L. (Massachusetts Institute of Technology)
    Micro-Electromechanical Devices/Poster/Abstract/2010 Annual
  2. Design and Characterization of a 6 Degree-of-freedom Meso-scale Nanopositioner with Integrated Strain Sensing
    DiBiasio, C. M. (The Charles Stark Draper Laboratories); and Culpepper, M. L. (Massachusetts Institute of Technology)
    Micro-Electromechanical Devices/Poster/Abstract/2010 Annual
  3. Electromagnetic-force-driving Type MEMS Switch Using High Performance NdFeB/Ta Thin Film Permanent Magnet
    Ishibashi, M.; Tanabe, R.; Shinshi, T. (Tokyo Institute of Technology); and Uehara, M. (Hitachi Metals, Ltd.)
    Micro-Electromechanical Devices/Poster/Abstract/2010 Annual
  4. Direct, High-speed Milling of Polymer Microchamber Arrays
    Phaneuf, C. R.; Forest, C. R. (Georgia Institute of Technology)
    Micro-Electromechanical Devices/Poster/Abstract/2010 Annual

Nanotechnology

  1. Heat-controlled Injection Molding of Nanostructured Optical Elements
    Mitsuda, T.; Nagato, K.; Hattori, S.; Hamaguchi, T.; Nakao, M. (The University of Tokyo)
    Nanotechnology/Poster/Abstract/2010 Annual
  2. Penetration of Residual Layer in Nanoimprint Lithography by Direct Oxidation of Photocatalytic Film
    Shimoda, M.; Nagato, K.; Hamaguchi, T.; Nakao, M. (The University of Tokyo)
    Nanotechnology/Poster/Abstract/2010 Annual

Novel Equipment And Processes

  1. Measurement of Current in Electro-chemical Discharge Machining by Forced Discharge Dispersion
    Furutani, K.; Shintani, H.; Murase, Y.; Arakawa, S. (Toyota Technological Institute)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  2. Optical Deflection Identification Based on Dark-field Laser Scattering for the Inspection of Crystalline Silicon Wafer in Solar Cell
    Kim, G.-B.; Yeon, J.-S. (Chungju National University)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  3. Fast Detection of Micro Defects Using Magnetic Nondestructive Testing Methods
    Nakajima, R.; Nagato, K.; Kawamoto, Y.; Kaito, H.; Nakao, M.; Hamaguchi, T. (The University of Tokyo)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  4. The Effect of Laser Heating on the Ductile to Brittle Transition in Silicon Carbide
    Ravindra, D.; Poyraz, H. B.; Patten, J. A. (Western Michigan University)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  5. Mechanical Design of a Multi-axis Precision Flexure Stage System for Advanced X-ray Stereo Imaging Instrument for Particle Tracking Velocimetry at the Advanced Photon Source*
    Shu, D.; Lee, W.-K. (Argonne National Laboratory)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  6. A Novel Exposure Method Based on Dissolved Oxygen Control for Nano-stereolithography Using Evanescent Light
    Takahashi, S.; Nagano, T.; Kajihara, Y.; Takamasu, K. (The University of Tokyo)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  7. Position Measurement for Miniature Robot Using Moving Line Lasers
    Torii, A.; Yamada, T.; Ueda, A.; Doki, K. (Aichi Institute of Technology)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  8. Study on Multi-layering of Metal Micro-reactor Using Diffusion Bonding
    Tsuchiya, K.; Nunokawa, T.; Kikuchi, A.; Nakao, M. (The University of Tokyo)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual
  9. Biomolecular-imaging Device Using Light-addressed Excitation on a Photocatalyst Substrate
    Yamamoto, A.; Nagato, K.; Tsukada, T.; Tanaka, A.; Hamaguchi, T.; Nakao, M. (The University of Tokyo); and Suzurikawa, J. (Research Institute of National Rehabilitation Center for Persons withDisabilities)
    Novel Equipment And Processes/Poster/Abstract/2010 Annual

Optics and Interferometry

  1. Evaluating the Sensitivity of Periodic Errors in Heterodyne Interferometry
    Ganguly, V.; Kim, N. H.; Kim, H. S.; Schmitz, T. L. (University of Florida)
    Optics and Interferometry/Poster/Abstract/2010 Annual
  2. Compression Molding of Refractive and Diffractive Hybrid Glass Lenses
    He, P.; Li, L.; Yi, A. Y. (The Ohio State University); and Wang, F.; Georgiadis, K.; Klocke, F. (Fraunhofer Institute for Production Technology (IPT)
    Optics and Interferometry/Poster/Abstract/2010 Annual
  3. Development of a Laser-guided Deep-hole Measurement System with Lower Production Cost
    Katsuki, A.; Onikura, H.; Sajima, T.; Satou, T.; Nishi, H. (Kyushu University); Murakami, H. (Kagoshima University); Pietri, V. (IFMA); and Ali, Md A. (Interntional Islamic University Malaysia)
    Optics and Interferometry/Poster/Abstract/2010 Annual
  4. Non-contact Adaptive Optic Actuator System for Wavefront Distortion Correction
    Saathof, R.; Spronck, J. W.; Munnig Schmidt, R.-H. (Delft University of Technology)
    Optics and Interferometry/Poster/Abstract/2010 Annual
  5. “NEXCERA”, Zero Thermal Expansion Ceramics for Optical Applications
    Sugawara, J.; Unno, H.; Kosugi, N.; Kuma, Y.; .Abe, K. (Krosaki Harima Corporation)
    Optics and Interferometry/Poster/Abstract/2010 Annual

Precision Fabrication and Assembly

  1. Mathematical Model for Sheet Glass in Air Bearing
    Al Husseini, A. M.; Heilmann, R. K.; Schattenburg, M. L. (Massachusetts Institute of Technology)
    Precision Fabrication and Assembly/Poster/Abstract/2010 Annual
  2. Design Principles and Best Practices for Rapid Prototyping of Meso- and Micro-scale Flexures via Micromilling
    Gafford, J. B.; Panas, R. M.; Cullinan, M. A.; Culpepper, M. L. (Massachusetts Institute of Technology)
    Precision Fabrication and Assembly/Poster/Abstract/2010 Annual
  3. Integrated Prescan Optics for Laser Printers
    Garrard, K. P.; Sohn, A. (North Carolina State University)
    Precision Fabrication and Assembly/Poster/Abstract/2010 Annual
  4. Evaluation of Hydroxide Catalysis Bonding Strength
    Kim, H. S.; Schmitz, T. L. (University of Florida)
    Precision Fabrication and Assembly/Poster/Abstract/2010 Annual
  5. Eco-friendly Micro Electrochemical Machining
    Ryu, S H.; Yu, J. (Chonbuk National University)
    Precision Fabrication and Assembly/Poster/Abstract/2010 Annual

Surface Metrology

  1. Self Calibration of the Linearity Error of Angle Sensors for Differential Laser Autocollimation
    Uda, Y.; Shimada, S. (Osaka Electro-Communication University); and Go, Y. (Nagase Integrex Co., Ltd.)
    Surface Metrology/Poster/Abstract/2010 Annual

Ultraprecision Machining

  1. Tool Wear in Diamond Turning of Steels
    Furushiro, N.; Higuchi, M.; Yamaguchi, T.; (Kansai University); Terauchi, S.; Matsuda, S. (Osaka Yakin Kogyo Co., Ltd.); and Shimada, S. (Osaka Electro-Communication University)
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  2. A Study on Ultra-fine Machining of Micro Square Type Pyramid Pattern on Large-area Roll Mold
    Je, T.-J.; Choi, D.-S.; Yoo, Y.-E.; Jeon, E.-C.; Yoon, J.-S.; Jang, S.-H.; Whang, K. H. (Korea Institute of Machinery & Materials (KIMM)); and Park, S.-C. (National Institute of Advanced Industrial Science and Technology (AIST))
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  3. Diamond Tool Wear Reduction Mechanisms in Elliptical Vibration Assisted Machining
    Lane, B. M.; Dow, T. A.; Scattergood, R. O. (North Carolina State University)
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  4. High Speed Milling of an Alvarez Optic
    Lineberger, J. L.; Dutterer, B. S.; Davies, M. A.; Smile, P.; Suleski, T. J. (University of North Carolina at Charlotte)
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  5. Creation of Microgroove with Two Flat-ends for Hard Material
    Misawa, Y.; Nakamoto, K.; Ishida, T.; Takeuchi, Y. (Osaka University)
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  6. Thermo-chemical Wear Study on Orthogonal Diamond Turning of Steel and Stainless Steel
    Shi, M.; Lane, B. M.; Dow, T. A.; Scattergood, R. O. (North Carolina State University)
    Ultraprecision Machining/Poster/Abstract/2010 Annual
  7. Ultraprecision Shaping of Complex Prototypes With Multi Freeform Surfaces
    Steinkopf, R.; Kolbmueller, A.; Gebhardt, A.; Risse, S.; Eberhardt, R.; Tünnermann, A. (Fraunhofer Institute for Applied Optics and Precision Engineering IOF); and Lindig, K.; Dobschal, H. J.; Rudolph, G. (Carl Zeiss AG)
    Ultraprecision Machining/Poster/Abstract/2010 Annual